Product Of


List Of Product



Description

The WATERAX STRIKER-2 also known as STRIKER-II Plus® pump, pairs a reliable 2-stage pump end with the Honda 4-stroke 13 HP engine to achieve pressures of up to 230 PSI (15.9 BAR) and flow rates reaching 105 GPM (397 L/Min). It can be used by itself, in tandem or in parallel with other WATERAX pumps, and is also a very popular choice for slip-on applications.

The STRIKER-2 provides additional pressure useful to overcome longer distance and elevation.

It can be used by itself, in tandem or in parallel with other WATERAX pumps, and is also a very popular choice for slip-on applications.

Product selection matrix  :  Download
DATA-SHEET  :  Download
Quick guide  :  Download
Specification documents  :  Download

STRIKER SERIES

STR2-13P

Specification

Flow rate at specified pressure
Maximum Pressure: 230 PSI (15.9 bar)
Maximum Flow: 105 US gals/min (397 L/min)
Maximum Head: 531 (162 m)
 
Performance
97 GPM (367 lpm) @ 100 PSI (6.9 BAR)
80 GPM (303 lpm) @ 150 PSI (10.3 BAR)
58 GPM (202 lpm) @ 200 PSI (13.8 BAR)
 
Engine
Model & Type: Honda, GX390 Series, 4-cycle, horizontal shaft, single cylinder, OHV
Maximum Power: 11.7 HP (8.7 kW) @ 3600 RPM
Maximum Torque: 19.5 lb-ft (26.4 Nm) @ 2500 RPM
Starting System: Detachable 2-Stage Centrifugal
 
Weight
Weight: 127 lbs (58 Kg)
 
Frame
Carry frame
 
Drive Unit
Timing Belt and Pulley; Speed Increaser 1.88:1
 
Other specifications
Primer: Jabsco Hand Primer (Standard)
Fuel Tank: Integral 1.6 US gallons (6.1 L) (Standard)
Discharge Gauge: 0-600 psi, 2-1/2" dial (Standard)
Check Valve Manifold: 1-1/2" NPSH (Standard)

Share This

Contact Us

If you have a question about us, need more information, or want to make a suggestion, Please use any of the following options to contact us




PT. TRIYASA CITRA SEJAHTERA


Address      :  Gedung Graha Pulo 3rd floor No. 89B
     Jl. Buncit Raya – Warung Jati
Phone      :  021-22793302
Fax      :  021-22793305
Email      :  info@tcsindonesia.co.id